MCC 'In-drawer' Electrical Monitoring Solution
For thermal protection where you can’t see, our unique ‘fit and forget’ 24×7 MCC Electrical Monitoring solution gives you ultimate peace of mind.
Permanent 'In-drawer' Thermal Monitoring for MCC
Datacenters
Oil & Gas
Finance
Healthcare
Datacenters
Mining
Marine
Petrochemical
The Exertherm® 24×7 MCC Electrical Monitoring solution permanently monitors the thermal condition of the power ‘IN / OUT’ terminations at the rear of the drawer. The MCC solution is provided in a simple and easy to fit kit per drawer, comprising of Thermal Sensors, Datacard & LED status light. The solution provides local & remote Thermal and Phase Imbalance alarms.
Inside the MCC Drawer
- Our non-powered Sensors connect directly to the critical incoming / outgoing power connections, continuously monitoring temperature
- The MCC Datacard collects the Sensor temperature data to activate alarms when a fault is detected
- LED displays system status
Features
SUPPLIED IN KIT FORM PER MCC DRAWER
DISCONNECTS AND REMOVES WITH DRAWER
DRAWER MOUNTED LED PROVIDES LOCAL VISUAL CONDITION STATUS
THERMAL ALARMS VIA RELAY AND MODBUS TO SCADA/BMS
OEM VENDOR NEUTRAL
PHASE IMBALANCE ALARM FOR MOTORS
Benefits
24/7 ALL YEAR ROUND PROTECTION
REDUCED RISK OF OUTAGES
INCREASED SAFETY
LOW COST FIT AND FORGET SOLUTION
NO FUTURE INSPECTION DOWNTIME
SUITABLE FOR NEW BUILD OR RETROFIT
Why Exertherm?
Exertherm® is the global number one provider of 24×7 Thermal Condition Monitoring for electrical infrastructure, successfully installed worldwide by all major OEMs. We deliver complete solutions for LV/MV Switchgear, MCC Drawers, Dry Transformers and more. We’re so proud of our proven reliability we even offer a zero maintenance lifetime guarantee.
World No.1 Thermal Condition Monitoring Solution with Proven Reliability
Zero Maintenance & Lifetime Guarantee on Sensors
Complete Thermal Monitoring Solution for LV/MV Bus, Cable, MCC + TX
Sensors providing accurate data of uniform quality are a key part of the IIOT jigsaw - no sensors = no data
Wireless sensors pose a potential hacking threat to critical infrastructure. Exertherm is hardwired, and thus avoids any potential hacking issues.
Exertherm solutions are accepted & have been successfully installed in major projects globally by all major OEMs.
ANSI
IEC
What’s included in the Exertherm® MCC ‘In-Drawer’ kit?
1- Datacard
Collects Sensor Data
2- Sensor Loom
Connects to key monitoring points within the MCC
3- Status LED
Displays current monitoring status
1
2
3
Connectivity
The MCC thermal monitoring ‘In-drawer’ solution can be connected in 3 ways.
Relay Only
Local status LED + local/remote alarms.
Exertherm® ARM XL HMI
Local graphics on HMI & status LED + local/remote alarms + transfer of raw data via Modbus TCP/IP.
Exertherm® MCC Aggregator
Local status LED + local/remote alarms + transfer of raw data via Modbus 485.
Global OEM Approval
24×7 Thermal Protection
Zero Maintenance
Lifetime Guarantee
Simple Installation